Tag Archives: setup

photo of Cutting 5/8-inch threaded rod

A New Way to Level a Teardrop

photo of Original scissors-jack handle

Original scissors-jack handle

Teardrop Trail Log: June 8, 2017

After three seasons of Teardropping, I still wasn’t happy with my trailer leveling solution. I originally purchased a pair of scissors jacks, but the folding handles they came with were frustrating to use. Also, the jacks had a tendency to fall over before they came in contact with both the ground and the trailer.

Stabilizers Aren’t Perfect

Next I tried stabilizers, and although they had advantages, they didn’t work as well with uneven ground. They were perfect in combination with a scissors jack though. By lifting each trailer corner where a stabilizer was attached, they could be easily extended and provided a rock-solid platform once set.

So, back to the scissors jack. What could I do to improve on the basic Harbor Freight design? I didn’t want to modify the actual jack, but wanted an adapter that would allow the use of a cordless drill instead of the wacky and hard-to-use folding handle.

An Improved Scissors Jack

photo of The scissors jack adapter

The scissors jack adapter

The solution turned out to be very simple. The handle receptacle, a “U”-shaped piece of metal the connects with the handle hook, was large enough to receive a 5/8-inch piece of threaded rod, and then capture a 5/8-inch nut inside the handle receptacle. A 9/16-bolt welded perpendicular to one face of the 5/8-inch nut, would then turn the handle receptacle when captured by the 5-8-inch rod.

photo of Drill driving the scissors jack

Drill driving the scissors jack

I talked with my friends at Vintage Auto, and they had it welded up in a few minutes, and even painted it. Back at the house, I found I could easily run the scissors jack up and down with a 12-volt DeWalt cordless drill. A test on the trailer was successful also — the combination easily lifted the trailer.

We would use it camping for the first time at the Red Power Roundup in Des Moines, Iowa (that’s why the bolt has an International Harvester Red head), and I had the trailer leveled and on the stabilizers in about 20-minutes. A new record!

photo of the scissors jack adapter in use

Scissors jack adapter in use